ECVV-Judy He: 六月 2011

2011年6月29日星期三

MTW Series Trapezoid Grinding Mill

MTW Series Trapezoid Grinding Mill Introduction:
MTW series Trapezoid Grinding Mill obtain international advanced technology as well as many proprietary intellectual property rights. Our experts design MTW series mill according to advices of customers of YGM9518 mill and their long-term experiences. The MTW series mills adopt bevel gear integral transmission, inner light-oil lubrication system, arc whirl tube and another proprietary technology.

MTW Series Trapezoid Grinding Mill Application:
This series mills are mainly applied to the powder processing of mineral products in the industries of metallurgy, construction materials, chemical, and mining, etc. They can produce powder from various non-flammable and non-explosive mineral materials with Mohs hardness below 9. 3 and humidity below 6%, such as quartz, feldspar, calcite, talcum, barite, fluoride, Xircom, cinder, white lime, cement clinker, activated carbon, dolomite, granite, soft coal, coking coal, lignite, magnesia, chromium oxide green, gold ore, red clay, clay, kaolin, coke, coal Gangue, porcelain clay, kyanite, fluorspar, bentonite, medicinal stone liparite, diabase, pyrophyllite, shale red stone, emeraldite, basalt, gypsum, graphite, carborundun, heat insulating material, etc

MTW Trapezoid Grinding Mill Features:
1. bevel gear integral transmission: The traditional mill needs decelerator and ratcheting to drive the main shaft that increase the centering difficulty and is easy to bring noise as well as reduce the efficiency. MTW series mills adopt bevel gear integral transmission that compact the whole structure and simplify the installation as well as improve the efficiency.
2. Inner light-oil lubrication system: The traditional mills lubrication adopts grease lubrication which increases the resistance of lubrication, creates high inherent temperature and shortens the service life of bearing. MTW series mills adopt light-oil lubrication achieve the lubrication of bearing without oil pump and lubrication station.
3. Arc whirl tube: The traditional mills adopt board-type whirl tube that increases the resistance, reduces the performance, and stops the air flow and so on. MTW series mills adopt arc whirl tube reduce the resistance and avoid the air-stop and so on.
4. Curved surface shovel with changeable edge: The traditional mills adopt quick wear edge and edge combine with shovel. If the edge is worn, all of the shovel should be changed that increase the cost and the stop time. The edge of MTW series mill adopts wearable alloy materials which improve the service life. The Changeable edge is easy to change that save time and cost. The traditional flat shovel make the materials accumulate in one level that reduces the ring and roller service life. The curved surface shovel makes a vertical material liner which increases the working face and capacity.
5. Insolating type cyclone collector: Adopt insolating structure between the inner core and mixed air flow that improve the classifying efficiency and precision.
6. non-resistance inlet shell: Traditional observation door of shell protrude that makes the inner surface is not so smooth which brings eddy effect and increase the consumption. MTW series mill adopts the same curved surface which avoids the eddy effect.
7. Fine appearance: MTW series mills not only adopt many advanced structure but also optimize the appearance.

Main specification:

Item	MTW110	MTW138	MTW175
Roller number(pcs)	4	4	5
Inner diameter of roller (mm)	Ф1100	Ф1380	Ф1750
Speed(r/min)	120	96	75
Max. feed size(mm)	< 30	< 35	< 40
Final size(mm)	1.6～0.045 Fineness can reach to 0.038	1.6～0.045 Fineness can reach to 0.038	1.6～0.045 Fineness can reach to 0.038
capacity (t/h)	3.5～10	6.5～15	11～25
Overall dimension(mm)	8910×6950×9010	9860×8340×10227	13500×11500×9500
Weight (t)	18	28.5	46

Note: capacity is according to the limestone and passing rate is 80%
All of thee specification is just as reference.

Name		Item	Unit	Sepcification
Name		Item	Unit	MTW110	MTW138	MTW175
Main unit motor		Model		Y280M-6	Y315M1-6	Y355M1-6
		Power	Kw	55	90	160
		Speed	Rpm	980	990	990
Motor of classifier		Model		YCT200-4A(YCT200-4B)	YCT200-4B(YCT225-4A)	YCT225-4A(YCT225-4B)
		Power	Kw	5.5(7.5)	18.5	30
		Speed	Rpm	125～1250	125～1250	125～1250
Motor of blower		Model		Y250M-4	Y280M-4	Y315L1-4
		Power	Kw	55	90	200
		Speed	Rpm	1480	1480	1490
	Elevator	Model		TH250	TH315	TH315
		Motor		Y100L2-4	Y100L2-4	Y112M-4
		Power	Kw	3	3	4
		Speed	Rpm	1420	1420	1420
	Jaw crusher	Model		PE250×400	PE250×750	PE250×750
		Motor		Y180L-6	Y180L-6	Y200L2-6
		Power	kw	15	15	22
		Speed	Rpm	970	970	970
	feeder	Model		GZ2F	GZ3F	GZ4F
	feeder	Power	w	150	200	450

Resource:

www.ecvv.com is an innovative and comprehensive business portal in China, dedicated to saving costs for Chinese SMEs to find buyers and export to overseas markets.

<a href="http://www.ecvv.com">www.ecvv.com</a> is an innovative and comprehensive business portal in China, dedicated to saving costs for Chinese SMEs to find buyers and export to overseas markets.

Blister Packing Machine (DPB-140C)

This Blister Packaging Machine is a new product with high automatization which especially designed for middle and small pharmacy factory, hospital dosage room and health care factory. It adopts PLC Human Interface, frequency converter and digitization controlling and adjustable stroke, easy operation, long durability, small body but with full functions. It is the ideal Packaging Machine at present, which is well welcomed by customers. The machine has passed the Province Science and Technology Production Authentication.

FEATURES:
1. Main transmission part adopts swinging pin gear reducer having long life and lower noise and stable running.
2. Digitization and adjustable stroke, easy to operate, which suitable for different sizes packaging, especially for packing small batch but more kinds of products.
3. Plate structure, can pack some special shapes, such as oval, square and triangle etc.
4. Photoelectric color code checking, servo motor tracking traction, image and word register which make seal formal and beautiful.

Main Technical Parameters

Cutting Frequency (Times/min)	6-35
Capacity (10 thousand pcs/h)	2-11
Max. Forming Area and Depth(mm)	140×110×14
Stroke (mm)	40-120 can be manufactured as user's requirements
Standard Plate(mm)	80×57 can be manufactured as user's requirements
Air Pressure (Mpa)	0.4-0.6
Air Supply	≥0.2 m3/min
Total Power	380V/220V 50Hz 4.3kw
Main Motor Power (kw)	1.1
PVC Hard Pieces(mm)	0.150.5×140
PTP Aluminum Foil(mm)	0.02-0.035×140
Dialysis Paper(mm)	50-100g×140
Mould Cooling	Tap Water or Recycling Water
Overall Dimensions(mm)	2300×560×1410(L×W×H)
Weight (kg)	600

Resource:

www.ecvv.com is an innovative and comprehensive business portal in China, dedicated to saving costs for Chinese SMEs to find buyers and export to overseas markets.

<a href="http://www.ecvv.com">www.ecvv.com</a> is an innovative and comprehensive business portal in China, dedicated to saving costs for Chinese SMEs to find buyers and export to overseas markets.

Yalong Maintenance Electrical Trainer (YL-158)

Yalong YL-158 Maintenance electrical trainer is designed and developed according to requirements on “The 21^st Century Vocational Education Courses Reform And Teaching Materials Construction and Planning” by the Ministry of Education, combined with the requirements on the actual production experiences and vocational skills. The trainer is suitable for the teaching of electromechanical equipment installation and maintenance, electromechanical technology application, electrical operation and control, electrical technology application and electronic appliances in higher education vocational schools, secondary vocational schools, as well as for the cources such as vocational teaching and training of “Electrical Technology”, “Basic Electrical Skills”, “Electrical Measurement And Instruments”, “Motor And Electrical Control”, “Motor Control Circuit”, “Electrical Traction Control Circuit” and so on.

1. Functions

Projects:

1) 1-phase wattmeter connection;

2) direct 3-phase active wattmeter connection;

3) indirect 3-phase active wattmeter connection;

4) current mutual inductor and ammeter complete Y connection;

5) current mutual inductor and ammeter incomplete Y connection;

6) switch and voltmeter connection 3-phase voltage measurement.

7) power factors measurement;

8) 1-wattmeter 3-phase load measurement;

9) 2-wattmeter 3-phase load measurement;

10) ammeter and current mutual inductor Y circuit;

11) ammeter and current mutual inductor V circuit;

12) AC asynchronous motor jog control circuit connection;

13) AC asynchronous motor forward continuous rotation control circuit connection;

14) 3-phase asynchronous motor direct start, stop control circuit connection;

15) contactor lock 3-phase AC asynchronous motor forward, back control circuit connection;

16) button lock 3-phase AC asynchronous motor forward, back control circuit connection;

17) button, contactor lock 3-phase AC asynchronous motor forward, back control circuit connection;

18) universal switch control 3-phase asynchronous motor forward back;

19) 3-phase AC asynchronous motor Y-△(manual switching)start control circuit connection;

20) 3-phase AC asynchronous motor Y-△(time relay switching)start control circuit connection;

21) stator winding serial resistor start control circuit connection;

22) 3-phase AC asynchronous motor power consumption braking control circuit connection;

23) 3-phase AC asynchronous motor reversed braking control circuit connection;

24) multiply (below 3 units) motors sequence control circuit connection

25) motor forward-back travel control circuit connection;

26) DC motor forward back control ;

27) DC motor speed regulation experiment;

28) excited DC motor mechanical performance testing

29) common lathe control circuit connection;

30) electric pulley-block control circuit connection;

31) 3-phase AC asynchronous motor jog, continuous rotation control circuit connection;

32) remote control circuit connection;

33) button switching dual-speed motor speed regulation control circuit connection;

34) time relay switching dual-speed motor speed regulation control circuit connection;

35) switch reversed braking control circuit connection;

36) frequency converter panel functions parameters setting and operation training;

37) frequency converter motor jog control, start and stop control ;

38) motor rotation speed multi-stage control ;

39) industrial frequency and variable frequency switching control ;

40) analogy control motor open-loop speed regulation;

41) panel operation motor open-loop speed regulation;

42) frequency converter protection and alarming function training;

43) PLC frequency converter open-loop speed regulation;

44) PLC traffic light control training;

45) PLC control motor sequence start;

46) PLC control 3-phase asynchronous motor Y-△ start circuit;

47) touch screen parameters setting;

48) touch screen programming;

49) touch screen ,PLC,frequency converter training;

50) 2-phase hybrid stepper motor control ;

51) 2-phase hybrid stepper motor torque measurement training;

52) AC servo motor control ;

53) AC servo motor torque measurement training;

54) 3-phase Thyristor bridge rectification circuit ;

55) 3-phase Thyristor KC785 IC trigger circuit ;

56) current regulator, speed regulator and overcurrent protection circuit ;

2. The structure and configuration

1, The structure

As the maintenance electrical training is involved with many majors and industries, technologies, now the maintenance electrical trainers are mainly in composition of various combination, (such as: electrical and electronic trainers, machine electrical trainers, PLC trainers and so on), which need a lot cost, a large space.

Yalong YL-158 Maintenance Electrical Trainer is in a reasonable layout, and it is developed to save space, with a reasonable layout, compact structure, full functions and high efficiency.

The trainer, is composed of frame, window, instrument operation panel, electrical system, motor, the electrical system is composed of touch screen part, PLC part, frequency converter part, 514C part, DC power supply part, electric traction and relay control part, motor power, torquer, rotation speed measurement part, AC & DC voltage, current, 1-phase & 3-phase AC power, AC power, power factors measurement part and so on.

The panel is installed with buttons, motor control circuit, various low-voltage electrical appliances, such as leak breakers, fuses, current mutual inductor, contactors, inter-relay, thermal relay, travel switches, switches, voltmeter, ammeter and wattmeter, to prolong the service life of the electrical appliances, with endurable ends to connect all electrical appliances to ensure long service life of all electrical appliances.

It is designed according to the real actual electrical control cabinet, the components are used as same as in the real industrial production control circuits, the training is done as same as the actual production process, in order improve th students’ vocational skills and quality fully and efficiently.

With leak protection, overload and circuit protection, to ensure human safety. After verification by actual experiences, it is proved to be an ideal vocational education training equipment.

SJF-55,60,70 Series PP Film Blowing Machine

Characteristics:
The cylinders and the screw stems of extruder are made of high-quality alloy steel with optimum hardness and strong corrosion resistance after precision finishing and nitrogen treatment.
The extruder can be lift up to 3 meters according to technoloogical requirements. Mode of film blowing;bottm blowing,The coiling unit adopts torque motor to keep proper tension and make even and roll-changing easy.
Use:
It is used for blowing polyethylene(PP)and also for blowing high and low density polyet-hylene(HEPE, LDPE)Which are widely used for packing food, garments, textile, daily necessityies and industrial products, etc.
Variables:

Type	F55	F60	F70
Diameter of screw	Φ55	Φ60	Φ70
L/D	28:1	28:1	28:1
Folding width of film(mm)	100-500	100-600	300-800
Single-face Thickness of film(mm)	0.01-0.1	0.01-0.1	0.01-0.1
Max. Extrusion(kg/h)	30	45	60
Power of main motor(kw)	15	18.5	22
Power of Traction motor(kw)	1.1	1.1	1.5
Length of Traction roller(mm)	550	650	850
Outline diameter(L×W×H)	4500×2000×3500	4800×2500×3800	5000×2800×4000
Weight(T)	3	4	5

Thermoforming Machine (ZPQ-250)

Tray Forming Machine

This forming machine is a newly developed machine with success to meet the needs in the market. Easy operation, lower energy consumption. It is suitable for forming foodstuff, medical equipments and the trays for electronic elements. It is integrated multi-functions like conveyor, blister forming, plate punch and counting displaying.

Main Technical Parameters

Cutting Speed (Times/min)	6-35
Power	380V/220V/50Hz
Feeder Stroke (mm)	40-200
Max. Forming Area (mm*mm)	230x190
Max. Forming Depth (mm)	50
Forming upper Heater Power (kw)	1.5
Forming lower Heater Power (kw)	1.5
Motor Power (kw)	1.5
Air Pump Pressure (MPa)	0.4-0.6
Air Pump volume(m3/min)	≥0.36
Packing Materials Width(H×W)	Medical PVC(mm x mm):0.10~0.60 x 250
Overall Dimensions(mm x mm x mm)	2400×850×1700(L×W×H)
Weight (kg)	500

Jaw Crusher

Description
Jaw crusher (stone crusher), which is ideal for the primary and secondary crushing, is widely used in mining, quarry, metallurgy, building, highway, railway, construction waste processing, water conservancy and chemical industry, etc. It features high reduction ratio, easy operation, simple construction, repeatable performance, easy maintenance, and low consumption.

Working Principle
The motor drives the eccentric shaft to rotate by the V-belt & the grooved pulley, then the movable jaw moves back and forth to crush the materials in the crushing cavity which is composed of stationary jaw plate & movable jaw plate and side protection plate. The end products slide from the discharge opening at the bottom of the jaw crusher.

Technical Parameters

Patent No.200720072192.2

Jaw crusher Model	Feed Opening Size (mm*mm)	Max. Feed Edge (mm)	Discharge Opening Range (mm)	Processing Capacity (t/h)	Eccentric Shaft Speed (r/min)	Motor Power (kw)	Weight (t)	Overall Dimensions LWH (mm)
PE-400*600	400*600	340	40-100	16-55	275	30	6.5	1565	1732	1586
PE-500*750	500*750	425	50-100	32-80	275	55	10.3	1890	1916	1870
PE-600*900	600*900	500	65-160	50-120	250	55-75	15.5	2305	1840	2298
PE-750*1060	750*1060	630	80-140	100-180	250	110	28	2450	2472	2840
PE-800*1060	800*1060	640	100-200	136-230	250	110	29	2500	2472	2840
PE-870*1060	870*1060	660	200-260	190-336	250	110	30.5	2870	2430	2800
PE-900*1200	900*1200	750	120-240	180-280	200	132	46.5	3435	2904	2990
PE-1000*1200	1000*1200	850	220-340	200-300	200	132	47	3535	2904	2990
PE-1200*1500	1200*1500	1000	150-300	300-500	180	200	79	4587	3342	3553
PE-1500*1800	1500*1800	1200	220-350	500-800	180	280	122	5160	3660	4248
PEX-250*1000	250*1000	210	25-60	16-52	330	30-37	6.5	1530	1992	1380
PEX-250*1200	250*1200	210	25-60	20-60	330	37	7.7	1900	2192	1430
PEX-300*1300	300*1300	250	20-90	16-104	300	55	11	1750	2320	1400
PEX-350*1200	350*1200	300	70-140	20-120	300	75	11.43	2123	2250	1721

LY production of jaw crusher, samll jaw crusher , mini jaw crusher have quality assurance.jaw crusher, samll jaw crusher , mini jaw crusher is necessary equipment. jaw crusher,small jaw crusher , mini jaw crusher can lead you to success.

Resource:

www.ecvv.com is an innovative and comprehensive business portal in China, dedicated to saving costs for Chinese SMEs to find buyers and export to overseas markets.

<a href="http://www.ecvv.com">www.ecvv.com</a> is an innovative and comprehensive business portal in China, dedicated to saving costs for Chinese SMEs to find buyers and export to overseas markets.

Wire Straightening and Cutting Machine (GT2-7W)

Product Description
CHARACTERS:
●Special designed for the production of straightened and cut-off rods, high speed and high output: maximum speed can be up to 160m/min.
●High precision: cut-to-length tolerance ≤±1mm.
●High linearity: straightened linearity ≤2mm/m.
●Straightening short rod: minimum length can be up to 0.3m.
●Low malfunction rate.

Product Specification/Models
Model:GT2-7W
Raw material Φ2 –Φ7 [mm], deformed and plain wire
Straightening speed (m/min) Maximum 160[m/min]
Cutting length(mm) 300 – 1200 [mm]
Linearity of straightening(mm/m) ≤ 2 [mm/m]
Tolerance of cut-to-length(mm) ≤ ±1 [mm]
Installed power(kw) 9.7 [KW]

Chocolate Blister Packing Machine (DPB-250)

This chocolate/ butter packaging machine is suitable for packaging chocolates, biscuits, perfume, essence, facemasks etc with AL/PL, Al/Al, PL/PL materials. It is equipped with a touch screen control system and frequency converter, with characterized by higher automation and easy operation. It is popular equipment for the foodstuff and cosmetics, particularly for those who are to make their own career.

FEATURES:

1. The distance can be adjusted freely in the same flat surface for forming, heat-sealing, perforation, punching parts etc. It is suitable for various sizes of foodstuff packaging, and it has high precision and good Suitability.
2. Adjustable stroke, automatic feeding, register heating, positive pressure forming, up and down net web, cylinder heat-sealing, printing batch number with automatic perforation, mechanic dragging, easy operation, stable running.
3. It is adopted with imported gear reducer with lower noise and long life.
4. Correct location of die pressure plate, convenience of replacement.
5. Combination mechanism, convenient to assemble and disassemble easy maintenance. (The body can be manufactured separately in order to easily transport the machine into workshop)
6. Equipped with temperature reserve chocolate feeder, it can ensure the chocolate charged smoothly, freely and accurately.
Notes: it can be added register sealing device with cursor trace.

Technical Parameters

Cutting Frequency (Times/min)	6-40
Capacity (10 thousand pcs/h)	3.5-23
Max. Forming Area and Depth(mm)	240×150×26
Stroke (mm)	40-160 (customized)
Standard Plate(mm)	80×57 (customized)
Air Pressure (Mpa)	0.4-0.6
Air supply	≥0.3 m3/min
Total Power	380V/220V 50Hz 6.2kw
Main Motor Power (kw)	1.5
PVC Hard Pieces(mm)	0.150.5×250
PTP Aluminum Foil(mm)	0.02-0.035×250
Dialysis Paper(mm)	50-100g×250
Mould Cooling	tap water or recycling water
Overall Dimensions(mm)	2900×720×1550(L×W×H)
Weight (kg)	1600

Industrial Grinding Mill (MTM Series)

Industrial Grinding Mill (MTM series) Application:
MTM Medium Speed Trapezium grinder is a leading-world-level industrial mill. It is designed by our own engineers and technical workers, basing on industrial mill research of many years and adopting world-leading-powder processing technology. Our machine adopts many advantages from numbers of mill all over the world, such as trapeziums working surface, flexible connection, roll linked pressure boost, etc. It has overcome the traditional mills defect completely in application, capacity, fineness, energy consumption, service life, etc. And it is the ideal substitute of the traditional mill, such as Raymond mill, high pressure suspension mill, ball mill, etc. Nowadays, our products have been widely used in metallurgy industry, electric power industrial, chemical, building, steel industry, coal industry, etc. And it has brought large economic benefits to our customers and the society.

Industrial Grinding Mill (MTM series) Features:
MTM Medium Speed Trapezium Mill has lots of matchless advantages, and it adopts the latest national mill patents. It has features as follows: new designing, reasonable structure, smaller size, lower energy consumption, longer service life, and less consumption of wearing parts, higher performance cost ratio, etc. All its technical performance has reached leading and international level.

Industrial Grinding Mill (Medium Speed Trapezium Mill) Specification:

Item	MTM100	MTM130	MTM160
Number of roller	4	5	6
Major diameter of roller ×Height(mm)	Φ310×170	Φ410×210	Φ440×270
Internal diameter of roller × Height(mm)	Φ950×170	Φ1280×210	Φ1600×270
Main engine spindle speed(mm)	130	103	82
Maximum feeding grain size (mm)	25	30	35
Grain size of finished product (mm)	1.6~0.045/0.038	1.6~0.045/0.038	1.6~0.045/0.038
Output (t/h)	2.1 - 8	4 - 13	7 - 22
Overall dimension (mm)	7100×5900×7900	9200×7250×9700	12550×5700×8355
Weight(t)	16	26.1	35

Note: The output in the form refers to grind limestone to 80% pass 200 meshes.

Name	Item	Unit	Specification and technical data
Name	Item	Unit	MTM100	MTM130	MTM160
Motor of main engine	Model	-	Y225S-4	Y280S-4	Y315M-4
	Power	kw	37	75	132
	Spindle speed	r/min	1470	1480	1480
Motor of adjustable varying speed motor	Model	-	YCT200-4A	YCT200-4B	YCT225-4A
	Power	kw	5.5	7.5	18.5
	Spindle speed	r/min	125~1250	125~1250	125~1250
Motor of elevator	Model	-	Y100L-4	Y100L2-4	Y112M-4
	Power	kw	3	3	4
	Spindle speed	r/min	1420	1430	1420
Motor of centrifugal induced draught fan	Model	-	Y220L-4	Y250M-4	Y315M-4
	Power	kw	37	75	132
	Spindle speed	r/min	1470	1480	1480
Motor of jaw crusher	Model	PE	200x350	250x400	257x750
	Model	-	Y160M-6	Y180L-6	Y200M-6
	Power	kw	7.5	15	22
	Spindle speed	r/min	970	970	970
Electro magnetism Vibrating Feeder	Model	Kw	GZ2F	GZ2F	GZ3F
Electro magnetism Vibrating Feeder	Power		0.1	0.15	0.2

Note: This specification is just reference, any changes are subject to the products.
Resource:

www.ecvv.com is an innovative and comprehensive business portal in China, dedicated to saving costs for Chinese SMEs to find buyers and export to overseas markets.

<a href="http://www.ecvv.com">www.ecvv.com</a> is an innovative and comprehensive business portal in China, dedicated to saving costs for Chinese SMEs to find buyers and export to overseas markets.

Dryer

Advantages of Dryer

1, can be drying a variety of materials.
2, equipment, simple structure, easy to operate.
3, stable performance, reliable operation.
4, efficiency.

Description of Dryer

Our dryers are designed for drying materials in preparation production line. It is the key equipment for material drying operation after wet process. With the advantages of high production, low power consumption, easy operation and simple maintenance, Xuanshi rotating dryers are widely used in many industries, such as mineral processing, building materials, metallurgy, chemical, and so on.

Specifications of Dryer

Specifications (m)	Capacity (t/h)	Main motor		Main gear box		Weight (t)
Specifications (m)	Capacity (t/h)	Power(kw)	Model	Model	Speed reduction ratio	Weight (t)
Φ1.2×10m	2.5	7.5	Y160M-R3	ZL50-16-I		13.5
Φ1.5×12m	3.3-4.9	10	Y160L-6-B3	JZQ500-III-2F		18.9
Φ1.5×15m	4-6	18.5	Y200L1-6	JZQ500-III-2F		21
Φ1.8×12m	4-6	11	Y160L-6	ZQ50-16II-2	16.46	22.83
Φ2.2×12m	7-12	18.5	Y200L7-6	JZQ650-III	31.5	37.6
Φ2.2×14m	7-12	18.5	Y200L7-6	JZQ650-III	31.5	40
Φ2.2×16m	12	30	Y225M-6	JZQ750-III	31.5	45
Φ2.4×14m	12	30	Y250M-6	JZQ750-III	31.5	51
Φ2.4×18m	10-13	37	Y250M-6	ZL85-13-I	27.16	54
Φ2.4×20m	10-14	37	Y250N-6	ZL85-13-I	27.16	54.14
Φ3×20m	25	55	Y250M-4	ZL100-16-I	41.52	78
Φ3×25m	32-36	75	YR280M-4	ZL100-16-I	41.52	104.9

23 Ton Excavator

23 ton excavator, Isuzu (Japan) engine, Kawasaki (Japan) valve and pump, Nabtesco (Japan) travel motor and Kawasaki (Japan) swing motor. 1. 1cbm bucket capacity, self-made boom, arm, bucket, chassis, platform and bucket. With air conditioner.
Engine System: Brand & Origin: ISUZU(Japan)
Rated Power: 125/2100 kw/rpm Max.
Torque: 637. 9/1800 Nm/rpm
Idling Speed: 950rpm
Engine Displacement: 6. 949 L

Cylinder No. -Bore/Stroke: 6-105mmx125mm
Hydraulic System: Main pump: KAWASAKI(Japan)
Rated Pressure: 34. 3MPa
Multiple Unit Valve: KAWASAKI(Japan)
Rated Pressure: 34. 3MPa
Travel Motor: NABTESCO (Japan)
Traveling Speed (H/L): 5. 8/3. 8km/h
Swing Motor: KAWASAKI(Japan)
Swing Speed: 11r/min Working
Specifications: Weight: 23900kg
Bucket Capacity: 1. 1cbm
Bucket Width: 1256mm
Bucket Digging Force: 170kN

Arm Digging Force: 125kN
Ground Pressure: 52KPa

Grade Ability: 70%

Max. Digging Depth: 6900mm

Max. Digging Height: 9617mm

Max.Digging Radius: 10229mm

Max.Discharging Height : 6817mm

Min. Ground Clearance: 460mm

Min. Swing Radius: 3935/2915mm
Dimensions(LxWxH): 10120mmx3000mmx3100mm
Resource:

www.ecvv.com is an innovative and comprehensive business portal in China, dedicated to saving costs for Chinese SMEs to find buyers and export to overseas markets.

<a href="http://www.ecvv.com">www.ecvv.com</a> is an innovative and comprehensive business portal in China, dedicated to saving costs for Chinese SMEs to find buyers and export to overseas markets.

Shanghai LY Sand Washer

Description

Sand Washer is generally used to clear up and remove the dirt and contaminate mixed in sandstones. Novel sealing structure, adjustable overflow weir and reliable transmission system could fully ensure the complete washing and dehydrating. Sand Washer is frequently used in industries in need of sand including highway, water conservancy and constructions.
Working Principle
When the sand washer works, the motor drives the impeller to rotate slowly. While the dirt and impurities are removed by the added water, the large blocks are conveyed by the rotating impeller to the discharge chute.

Technical Parameters

Sand Washer Model	Screw Diameter (mm)	Tub Length (mm)	Selected Granularity (mm)	Processing Capacity (t/h)	Screw Speed (r/min)	Motor Power (kw)	Water Consumption (t/h)	Overall Dimensions LWH (mm)	Weight (t)
XL915	915	7585	<=10	100	21	11	10-80	850028103600	6.27
2XL915	915	7585	<=10	200	21	2*11	20-160	842037653960	11.11
XL1115	1115	9782	<=10	175	17	15	20-150	1097039454720	10.18
2XL1115	1115	9782	<=10	350	17	2*15	40-300	1097052504720	17.94
XS2610	2600	3220	<=10	50	0.8	5.5	4-4.5	322021252670	2.7
XS3016	3000	3810	<=10	80	0.8	15	10-20	380036863085	3.3

LY production of sand washer,sand stone washer have quality assurance.sand washer,sand stone washer is necessary equipment.
sand washer,sand stone washer can lead you to success.

Resource:

www.ecvv.com is an innovative and comprehensive business portal in China, dedicated to saving costs for Chinese SMEs to find buyers and export to overseas markets.

<a href="http://www.ecvv.com">www.ecvv.com</a> is an innovative and comprehensive business portal in China, dedicated to saving costs for Chinese SMEs to find buyers and export to overseas markets.

13 Ton Excavator

Engine System:

Brand & Origin: ISUZU(Japan)

Rated Power: 69.6/2200 kw/rpm

Max. Torque: 337.6/1600 Nm/rpm

Idling Speed: 1000rpm

Engine Displacement: 4.329 L

Cylinder No.- BorexStroke: 4-105mmx125mm

Hydraulic System:

Main pump: Doosan(Korea)

Rated Pressure: 31.4/34.3MPa

Multiple Unit Valve: Parker (Korea)

Rated Pressure: 31.4/34.3MPa

Travel Motor: Doosan(Korea)

Traveling Speed (H/L): 5.3/3.1km/h

Swing Motor: Sunjin (Korea)

Swing Speed: 11r/min

Working Specifications:

Weight: 13600kg

Bucket Capacity: 0.53cbm

Bucket Width: 854mm

Bucket Digging Force: 91.8kN

Arm Digging Force: 65.3kN

Ground Pressure: 45.2 KPa

Grade Ability: 70%

Max. Digging Depth: 5532mm

Max. Digging Height: 8640mm

Max. Digging Radius: 8330mm

Max. Discharging Height: 6139mm

Min. Ground Clearance :392mm

Min. Swing Radius: 2500/2380mm

Dimensions(LxWxH): 7718mmx2490mmx2800mm

PE Series Jaw Crusher - Crushing Cobble

Introduction

Jaw crusher is mainly applied in crushing multiple ores and large block materials into medium granularity, the materials’ compression strength not more than 320Mpa. Jaw crushers can be classified two kinds: PE series coarse jaw crusher and PEX fine jaw crusher. PE and PEX series jaw crushers have the complete specifications, and the feeding granularity of jaw crushers is 125mm-1020mm. They are the best choice for the primary crushing. Jaw crusher is also used in mine, metallurgy, building materials, road building, rail building, water conservancy, chemical industry and other industries.

Our company has the proficient craftsmanship of manufacturing jaw crusher, and we reformed the techniques audaciously, then produced the jaw crusher of more superior, better quality, better satisfying the customers. Especially, the design and production, by we absorbing the domestic and international advanced technology, one-up other manufacturers. The large jaw crusher is one of our competitive product for customers, it is especially suited for the primaty crushing of limestone, shale, basalt, cobble, bluestone, multiple ores, etc.

Performace Characteristic

(1) deep crushing cavity, no blind area, feeding more fluently and higher production capcity.

(2) larger broken ratio and the end products are epigranular.

(3) the adjusting device of discharge hole is spacer model with the reliable performance, convenient use, and large adjustable range. The design make the machine flexible.

(4) lubricating system with safe performance, replacing the parts conveniently, and little workload of maintaining.

(5) simple structure, reliable performance, low operating charges.

(6) Energy-saving: the stand-alone can reduce the energy consumption by 15-30% while the whole system can save energy by double.

(7) Large discharge open range, which can meet different customers' requirements.

(8) Low noise and dust pollution.

Working Principle

PE/PEX series jaw crushers adopt survilinear motion extruding. The motor drives the belt and pulley, then the eccentric shaft make the swing jaw plate up-and-down move. When the swing jaw plate raises, the included angle between elbow board and swing jaw plate should get larger, accordingly swing jaw plate is getting near to the fixed jaw plate. At the same time, the materials are extruded, twisted, and grinded. When the swing jaw plate gets down, the included angle between the elbow board and swing jaw plate should get smaller, accordingly the swing jaw plate leave the fixed jaw plate by the effect of draw bar and spring. At the same time, the crushed materials are discharged. With the continuous run of the moter, the jaw crusher operates and discharges peridically, thus realizing the batch production.

Technical Parameter

Specification model	Technical feature				Motor capacity (kw)	Overall dimensions (length×wide×high) (mm)	weight (kg)
Specification model	Maximum feeding granularity (mm)	Adjustment range (mm)	Production capacity (t/h)	Speed of mainshaft (r/min)	Motor capacity (kw)	Overall dimensions (length×wide×high) (mm)	weight (kg)
PE150×250	125	10-40	1-3	285	7．5	922×745×933	700
PE250×400	210	20-80	5-20	310	18.5	1108×1142×1392	3000
PE400×600	340	40-100	16-65	275	30	1700×1732×1653	6500
PE500×750	425	50-100	45-100	275	55	2050×1860×2145	10200
PE600×900	500	65-160	50-120	250	55-75	2792×2168×2250	15500
PE750×1060	630	80-140	52-180	250	110	2660×2430×2800	28000
PE900×1200	750	95-165	140-260	200	132	3380×2870×3330	50000
PE1000×1200	850	150-265	315-340	200	132	3480×2876×3330	50600
PE1200×1500	1020	150-300	400-800	180	200	4200×3300×3500	78600

Simple Structure
Main components : frame, partiality axis, big pulley, flywheel, swing jaw plate, side guard board, elbow board, elbow board backseat, adjustable screw, reposition spring, fixed jaw plate and swing jaw plate, etc. among these parts, the elbow board also has insurance effect.

55 Mini Film Blowing Machine (SJ-D50)

use:

This machine set is used for blowing Low-density polyethylene (LDPE) and high- density polyethyene (HDPE) plastic film to make various vest bags and flat-rim bags which have been widely used for packing in the food industry, garment industry and textile industry, etc.

Characteristics :

Both the cylinder and the screw of the extruder are made of high quality alloy steel through nitration and precision finishing with the best hardness and corrosion resistance.,Scientifically designed, this machine set has two heads for one extruder with such advantages as increasing production capacity, saving energy, labour and workshop area, etc.

Main Technical Variables:

Model	D50	D55
Diameter of Screw(mm)	φ50	φ55
Max. Width of Folded Film (mm)	100-600	200-800
Single-face Thickness of Film(mm)	0.01-0.10	0.01-0.10
Max. Extrusion(kg/h)	35	50
L/D	26:1	26:1
Power of Main Motor(KW)	7.5-11	11-15
Power of Traction Motor(KW)	1.1	1.1
Heating Power(KW)	11	13
Overall Dimension (mm)	380019003000	550021003500
Weight(T)	1.5T	2T

2011年6月28日星期二

Advertising CNC Router (JCUT-1212A)

ADVERTISING CNC Router JCUT-1212A

Applications:

Can be used on advertisement engraving, advertisement cutting, stone processing cutting, Cu and Al molding cutting, mold manufacturing cutting, wood processing cutting, wood door manufacturing cutting, craft manufacturing cutting, light box cutting, building mold cutting, indoor decoration cutting, wave board processing cutting, light equipment mold processing cutting, sign and mark manufacturing cutting,

Acryl board processing cutting, stamp cutting, and PCB cutting

Features:

1) Machine body: whole cast iron

2) Guideway:cylindrical guideway

3) Driving mode:ball screw

4) Work dimensions: 1,200mm x 1,200mm x 80mm

5) Body dimensions: 1,500mm x 1600mm x 1,500mm (with bracket)

6) Z-axis working area: 80mm(or 150mm)

7) Max. Feeding height: 120mm or bigger

8) Cut thickness of material: ≤40mm

9) Max. Speed: 6,000mm/min

10) Working speed: 0 - 4,000mm/min

11) Mechanical precision: 0.01mm

12) Software: type 3 software, Artcut software, Artcam software

13) Max. Power consumption: 1.8kW

14) Power source: AC 220/50/60Hz (or 110v/60HZ)

15) Driver type: stepper motor(XY-85BYG, Z-57BYG motor)

16) Memory: without or (DSP)

17) Spindle: 1.5kW(Ф80mm) variable speed, water cooled motor (or 2.2kW or 3kW,or bigger)

18) Spindle speed: 0 - 24,000rpm/min

19) Blade diameter: Ф3.175mm, 4mm,6mm (or 8mm,10mm,12mm, 12.7mm)

20) Control system: (NCSTUDIO) or DSP (USB interface)

21) Command: G code, u00, mmg, plt

22) Running circumstance temperature: 0 - 45°C

23) Relative humidity: 30% - 75%

Packing:

Pack dimensions: 1,700 x 1700 x 1,600mm

Net weight: 600kg (with bracket)

Gross weight: 700kg

Wood CNC Router with ATC (JCUT-25H)

SLAP-UP CNC WOODMAKING MACHINE JCUT-25H

Knife storehouse: 10pcs/8pcs/6pcs (option)

Vacuum table and by suction dust collector: have

Machine body: whole steel structure

Guideway: XYZ-axis all use linear guideway

Driving mode: gear

Work dimensions: 1,300mm x 2500mm x 200mm

Body dimensions(with bracket): 2500x3200x1800mm

Z-axis working area: 100mm or 200mm

Max. Feeding height: 120mm or bigger

Cut thickness of material: less than or equal to 40mm

Max. Speed: 60000mm/min

Working speed: 0-35000mm/min

Mechanical precision: 0.025mm

Compatible Software: type 3 software, Artcut software, Artcam software

Max. Power consumption: About 6000W

Power source : AC220/50Hz or 110V/60HZ and 380AC

Driver type: Step motor (option)

Spindle: 4.5KW (Italy air cooling) or other

Spindle speed: 0 - 24,000rpm/min or 0-18000rpm/min

Blade diameter: 3.175mm,4mm,6mm,12mm or 12.7mm

Control system: LNC Precision System Control

Command: G code, HPGL